Clear View Bag Company - #1 IN CUSTOM BAGS & PACKAGING
CLEAR VIEW BAG COMPANY
#1 IN CUSTOM BAGS & PACKAGING

Search for: polypropylene

Home » Search results for "polypropylene "

Oriented Polypropylene (OPP) material.

The picture shows a OPP material.  Click the picture to enlarge it.  Material details include….

  • Hi clarity material.  FDA approved material.  Much clearer than LDPE especially as thickness increases.  
  • Generally is more costly material than LDPE with recycle symbol #5
  • Fits into How2Recycle® labeling system.  See _____ for details.  .
  • Use in form fill and seal applications only.  We print and slit the OPP.
  • Common uses: ideal for horizontal and vertical form fill and seal wrappers   

If you are in need of sample of the material, the REQUEST link below or at the very top of the page next to FAQ will allow you to request a quote or request a sample.

 

Read more

Cast Polypropylene

Cast Polypropylene (CPP) material.

The picture shows a clear cast polypropylene bag.  Click the picture to enlarge it.  Material details include….

  • Hi clarity material.  FDA approved material.  Much clearer than LDPE especially as thickness increases.  
  • Generally is more costly material than LDPE with recycle symbol #5
  • Fits into How2Recycle® labeling system.  See _____ for details.  .
  • All construction options available including prints, zipper, tape, vents, hang-holes, die-cuts, headers etc
  • We stock various sizes and thickness of CPP to provide short leadtimes (2-3 weeks) and low volumes (1,000 depending)
  • Common uses: bread, photographs, , higher end branded retail and promotional bags, produce etc.  

If you are in need of sample of the material, the REQUEST link below or at the very top of the page next to FAQ will allow you to request a quote or request a sample.

Read more
Vent Hole Poly Bags

The picture shows a printed polypropylene zipper bag with 8 (1/4″) vent holes.  Click the picture to enlarge it.  Bag details include….

  • Eight (1/4″) vents.  The vents allow the packaged cherries to “breath” and avoid trapping moisture in the bag.
  • In general, there are 4 sizes of standard vents:  pinhole vents (like punching a pin thru both sides of bag), 1/8″ round, 1/4″ round, 3/8″ round.  All vent hole sizes besides pin hole vents are available as flutter vents (vent not fully punched).
  • The maximum number of vents that can be put into a bag depends on the bag size and construction.
  • clear cast polypropylene material.
  • 3 color print:  green, black and white.
  • 3″ above the zipper with a centered dicut handle to aid in carrying.

If you are in need of a vented bag, the REQUEST link below or at the very top of the page next to FAQ will allow you to request a quote or request a sample.

Read more
Roll Stock Poly Bags

The picture shows polypropylene printed roll stock.  Click the picture to enlarge it.  Rollstock details include….

  • 002 mil polypropylene Single Wound Sheeting (SWS) .   Can make roll stock from cast polypropylene (CPP) or oriented polypropylene (OPP).
  • process print.   4 process colors (CMYK — cyan, magenta, yellow, black) with spot green, yellow, black and white
  • the printed rollstock will run on some kind of horizontal or vertical form fill and seal loading machine that allows fully automated packaging of the product.

If you are in need of printed rollstock, the REQUEST link below or at the very top of the page next to FAQ will allow you to request a quote or request a sample.

Read more
Lip for Ease of Opening Poly Bags

The picture shows a clear polypropylene process printed bag with 1.5″ lip and tape and hanghole.  Click the picture to enlarge it.  The picture shows …

  • a 1.5″ lip area at the bottom of the bag.  The back side of the bag is 1.5″ longer than the front side.  The additional 1.5″ is referred to as a “lip”.  On this bag, permanent tape is on the lip that will foldover the opening for closure of the bag once the release liner is peeled to expose the adhesive.
  • Process print plus 4 spot colors:  CMYK (process colors—cyan, magenta, black and yellow) and 4 spot colors (white, black, purple, yellow) on 2 sides.
  • 1.5″ header area with a rounded triangle hanghole.
  • Clear cast polypropylene material (CPP)
  • Bag is a bottom load bag for retail display.

If you are in need of a bag with a lip, the REQUEST link below or at the very top of the page next to FAQ will allow you to request a quote or request a sample.

Read more
Lip for Ease of Opening Poly Bags

The picture shows a clear polypropylene 6 color 2 sided printed polybag with 1.5″ lip and tape.  Click the picture to enlarge it.  The picture shows …

  • a 1.5″ lip area.  The back side of the bag is 1.5″ longer than the front side.  The additional 1.5″ is referred to as a “lip”.  On this bag, permanent tape is on the lip that will foldover the opening for closure of the bag once the release liner is peeled to expose the adhesive.
  • 6 color print:  white, black, yellow, 2 blues and orange.
  • 1.5″ header area with a 1/4″ hanghole.
  • Clear cast polypropylene material (CPP)
  • Bag is a bottom load bag construction for retail display of a ball toy.

If you are in need of a bag with a lip, the REQUEST link below or at the very top of the page next to FAQ will allow you to request a quote or request a sample.

Read more
Snacks Poly Bags

The picture shows a polypropylene printed bag for candy apples.  Click the picture to enlarge it.  Bag details include…

  • 1 color 2 side print in brown ink.
  • the full print coverage on both sides makes print in the picture hard to read clearly.
  • this bag is a “single use” cast polypropylene bag.  Some snack foods are packed in laminated barrier bags to elongate shelf life.  We do not make laminated bags.
  • bags such as these are available in low volumes….2,500 minimum

If you are in need of a printed polypropylene bag, the REQUEST link below or at the very top of the page next to FAQ will allow you to request a quote or request a sample.

Read more
Snacks Poly Bags

The picture shows a polypropylene printed bag for chocolate covered pretzels.  Click the picture to enlarge it.  Bag details include…

  • 6 color spot print:  white, black, purple, yellow, tan & brown.   The large brown plate coverage is “knocked out” to allow the product inside to be seen through the clear portion.
  • 95% of the bag is covered with ink
  • this bag is a “single use” cast polypropylene bag.  Many snack foods are packed in laminated barrier bags to elongate shelf life.  We do not make laminated bags.
  • bags such as these are available in low volumes….2,500 minimum

If you are in need of a printed polypropylene bag, the REQUEST link below or at the very top of the page next to FAQ will allow you to request a quote or request a sample.

Read more
Promotional Poly Bags

The picture shows a polypropylene tape bag.  Click the picture to enlarge it.  Bag details include….

  • process print plus spot colors:  Process CMYK (Cyan, Magenta, Yellow, Black)  red, black and white spot.
  • print to within 1/8″ of all edges
  • tape closure whereby the print on the front side lip once folded and sealed aligns with print on back of bag.  Tape and release liner is 3/8″ below opening on back side of bag.
  • creates a “package” that looks like a gift
  • 002 clear polypropylene bags
  • QR code in lower left

If you are in need of a promotional bag, the REQUEST link below or at the very top of the page next to FAQ will allow you to request a quote or request a sample.

Read more
Popcorn Poly Bags

The picture shows a polypropylene printed bag for popcorn.  Click the picture to enlarge it.  Bag details include…

  • 4 color spot print:  white, blue, red and yellow
  • nutritional information and UPC are on back
  • this bag is a “single use” cast polypropylene bag.  Cast polypropylene does not provide protection against air, oils and mositure moving through the walls of the material.  Most popcorn is packed in laminated barrier bags to elongate shelf life.  We do not make laminated barrier bags.
  • bags such as these are available in low volumes….2,500 minimum

If you are in need of a printed polypropylene bag, the REQUEST link below or at the very top of the page next to FAQ will allow you to request a quote or request a sample.

Read more
Popsicle Poly Bags

The picture shows a polypropylene printed bag for popsicles.  Click the picture to enlarge it.  Bag details include…

  • 2 color spot print:  white and orange
  • this bag is a single use cast polypropylene bag suitable for frozen conditions.    Most popsicles are packed in polypropylene bags due to high clarity of the material.  Popsicle bags can also be made out of low density polyethylene (LDPE).
  • custom size to fit any sizes popsicle is avaiable.  Typical size is approx 3.5×9
  • bags such as these are available in low volumes….2,500 minimum
  • volume prices can be had for multiple variety prints with change charges. See http://www.clearviewbag.com/how-to-best-order-multiple-custom-printed-polybag-variety-prints/ for details.
  • For more information on the most popular sizes and more information on the film material type, click this link here. 

If you are in need of a printed polypropylene popsicle bag, the REQUEST link below or at the very top of the page next to FAQ will allow you to request a quote or request a sample.

Read more
Noses Poly Bags

The picture shows a polypropylene bottom load hanghole printed bag.  Click the picture to enlarge it.  Bag details include….

  • process printed bags.  The gradation of screening from yellow to green forces this print into process print instead of strictly a spot print
  • print is in header area only
  • inverted T hanghole centered in header
  • bottom load bag
  • 002 mil cast polypropylene  material
  • the end use for this bag is for retail display of specialty tape

If you are in need of a printed bag, the REQUEST link below or at the very top of the page next to FAQ will allow you to request a quote or request a sample.

Read more
Page 1 of 3123